Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information BCM-U013600

Condition
The control modules in the vehicle send and receive information continuously on the vehicle's controller area network (CAN).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Interrupted or missing communication with the Differential electronic module (DEM).
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Normal driving.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Stability control (SC) blocked.
- Traction control (TC) blocked.
- Active yaw control (AYC) is blocked.

Possible source
- Disruption or intermittent open-circuit on the Control area network (CAN).
- Fault-trace the Differential electronic module (DEM).

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- Anti-spin warning lamp lit
- Stability function is not working
- Traction control not working
- Anti skid function is not working
- Adaptive cruise control; No Functionality
- Collision avoidance driver support; No Functionality
- Front monitoring/Active safety/City Safety does not work