Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PBM-U010400

Condition
The control module is continually supplied with necessary information from the Forward Sensing Module (FSM) via CAN communication. The control module checks the communication with the Forward Sensing Module (FSM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- No communication with the Forward Sensing Module (FSM).
- Incorrect signal lasts longer than 1.5 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Engine started.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Fault-trace the Forward Sensing Module (FSM).

Fault symptom[s]
- Adaptive cruise control; No Functionality