Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DEM-P188911

Condition
The Differential electronic module (DEM) checks the performance of the oil pressure pump. The control module compares the current strength from the oil pressure pump to the predefined parameters.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The voltage from the oil pressure pump is greater than 6 V.
- Short-circuit to ground in the power supply cable.
- Incorrect value lasts longer than 25 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Driving.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value

- Four wheel drive is disconnected while the fault exists.

Possible source

- Damaged connector between oil pressure pump and Differential electronic module (DEM).
- Short-circuit to ground in the voltage supply cable.
- Internal leak in the oil pressure pump.
- Damaged oil pressure pump.

Fault symptom[s]
- MU, 4-wheel/all wheel drive/Does not work
- IV, Text window and warning symbol/Text message