Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P0A0F68

Condition

Note! This diagnostic trouble code (DTC) status is an event controlled diagnostic trouble code (DTC). An event controlled diagnostic trouble code (DTC) does not mean that there is a fault in the control module when it is active, but is designed as information.

Engine control module (ECM) monitors the time it takes for the engine to start. If the control module detects that the start time has been outside the limit value for a certain time, the diagnostic trouble code is generated.
The diagnostic trouble code can be diagnosed at engine start.

Substitute value
- Nothing.

Possible source
- This diagnostic trouble code (DTC) is not caused by a fault that needs to be remedied.

Fault symptom[s]
- None.