Fault-Tracing Information

Fault-tracing

Fault-tracing
Fault-trace the central electronic module (CEM).
Troubleshoot Brake control module (BCM). Check if there are trouble codes stored that indicate problems with the brake system's sensors.
Return to this fault tracing if no relevant DTCs are found, or if the fault persists.

Do you wish to continue with fault tracing?

Yes - Verification

No - FAULT FOUND

-------------------------------------------------

Verification
Troubleshoot the CAN-net according to link below.
Remedy as necessary. Check to see if the diagnostic trouble code (DTC) recurs.

Other information
- General information about fault-tracing in CAN Initial Inspection and Diagnostic Overview
- See also Design and Function, CAN-network.

Has the fault been remedied?

Yes - FAULT FOUND

No - Information

-------------------------------------------------

Information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Fault-tracing

FAULT-TRACING FAILED - No Fault Found

-------------------------------------------------