Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-P017200

Condition
Engine Control Module (ECM) receives information from the heated oxygen sensor about fuel/air mixture in different load areas. If Engine Control Module (ECM) registers that fuel/air mixture deviates too much from target lambda, so that adaptations for bank 1 end up in any of its end-positions, the diagnostic trouble code is generated.

Substitute value
- Nothing.

Possible source
- Clogged air filter.
- Leak of crankcase ventilation.
- Oil level too high.
- Contaminated engine oil (gasoline mixed in oil).
- Leaking injectors.
- Leaking EVAP-valve
- High fuel pressure.
- Damaged mass air flow sensor.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.
- Poor performance.
- Engine misfires.