Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PBM-C200818

Condition
Park Brake Module (PBM) supplies voltage to left brake caliper directly via an output.
The control module checks the power consumption on the output.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The current consumption does not reach correct level at activation.
- Incorrect signal lasts longer than 0.1 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated function.
- Ignition position 0, I and II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Open circuit on signal cable.
- Damaged Park Brake Module (PBM).

Fault symptom[s]
- Information lamp is on
- Message in information display
- Electrical parking brake; Reduced Functionality