Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PSCM-C200100

Condition
Power Steering Control Module (PSCM) monitors the control module's internal temperature.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The internal temperature is less than -40°C.
- Incorrect value runs longer than 1 second.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- Restriction of power to the pump motor.

Possible source
- The control module's internal temperature is too low.

Fault symptom[s]
- Text window and warning symbol/Yellow symbol and text message
- No or poor steering assistance