Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-C11324B

Condition
Forward Sensing Module (FSM) checks external components connected to control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The visual collision warning indicator has over heated.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated indicator.
- Control module supplied with power for at least 5 seconds.
- The system voltage is greater than 8.0 V.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Ambient temperature too high.

Fault symptom[s]
- 1T, Warning lights and chimes/Front monitoring/Active safety indication/no indication
- CJ, Warning lights and chimes/Bulb failure indication/no indication