Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information FSM-C100154

Condition
The forward-sensing module (FSM) checks information from the forward-sensing camera.
The diagnostic trouble code (DTC) is stored if the control module detects:
- Incorrect camera calibration.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition on for at least 5 seconds.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The camera does not have a valid calibration.
- For the S60(11-), V60 and after structure week 201046 also the V70, XC70, S80, S80L and XC60, the DTC can be stored when camera calibration is not completed within 30 minutes A new 30 minute calibration period starts automatically.

Fault symptom[s]
- IV, Text window and warning symbol/Text message
- 1T, Warning lights and chimes/Front monitoring/Active safety indication/no indication
- CJ, Warning lights and chimes/Bulb failure indication/no indication
- PD, Brake pedal/Excessive "brake pedal effort" required
- 1S, Front monitoring/Active safety/Driver Alert Control does not work
- 1R, Front monitoring/Active safety/Lane Departure Warning does not work
- 5B, Road Sign Information (RSI)/Does not work