Fault-Tracing Information

Fault-tracing

Fault-tracing
Check the cable between Forward Sensing Module (FSM) #1 (#C1) and the heating coil for short-circuiting to ground.

Other information
- Signal specification, Forward Sensing Module (FSM) Signal Specification, Forward Sensing Module (FSM)
- Location of components, Forward Sensing Module (FSM) Location Of Components, Forward Sensing Module (FSM)
- Connecting the breakout box, Forward Sensing Module (FSM) Connecting The Breakout Box, Forward Sensing Module (FSM)

Continue - Activation

-------------------------------------------------

Activation




To ensure that the control module's test for the diagnostic trouble code has been run, the heating coil must first be activated and then deactivated.
Click on the symbol for VCT2000 to activate and then deactivate the heating coil.
Then check the diagnostic trouble code.
Read out the diagnostic trouble codes in the vehicle.





Does the diagnostic trouble code (DTC) recur?

Yes - Fault-tracing information

No - FAULT FOUND

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

FAULT-TRACING FAILED - DONE

Attempt New Test - Fault-tracing

-------------------------------------------------