Fault-Tracing Information

Fault-tracing

Checking the component

Note! Check that a Body sensor cluster stability sensor (BSC) for AWD vehicles is installed. If the incorrect sensor is installed, replace with the correct sensor.

The diagnostic trouble code (DTC) indicates that the body sensor cluster (BSC) has an internal fault.
Replace the body sensor cluster (BSC).

Other information





Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reconnect the connectors, reinstall components etc.
- Test drive the vehicle following:
- Ignition on.
Read off the status of the diagnostic trouble code (DTC).





Is the status of the diagnostic trouble code (DTC) intermittent?

Yes - FAULT FOUND

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the component

-------------------------------------------------