Fault-Tracing Information

Fault-tracing

Checking the component




- Ignition off.
- Remove the wheel for better access.
Replace with the correct sensor according to the spare parts catalogue.

Other information:
- Transmission input speed sensor rear wheels, B6304T4, TF-80SC AWD, B6324S5, TF-80SC AWD, B6324S4, TF-80SC AWD, B6324S5, TF-80SC, B6324S4, TF-80SC Transmission Input Speed Sensor, Rear Wheels






Continue - Verification

-------------------------------------------------

Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Restore components and connectors.
- Drive the vehicle at a speed greater than 10 km/h to be able to start the test for detecting the relevant diagnostic trouble codes (DTCs).

Note! Do not turn off the engine before VCT2000 has been connected and trouble status has been read off.

- Read off the diagnostic trouble codes (DTCs) by clicking on the VCT2000 symbol.





Has the fault been remedied?

No - Fault-tracing information

Yes - DONE

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the component

-------------------------------------------------