Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TVM-B1D5813

Condition
The Television Module (TVM) checks the signal on the signal cable (CVBS) to the Infotainment Control Module (ICM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal missing on the signal cable (CVBS) to the Infotainment Control Module (ICM).
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated control module.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Open-circuit on the signal cable (CVBS) between the television module (TVM) and the Infotainment Control Module (ICM).

Fault symptom[s]
- TV/Does not work