Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information DABM-B1D5511

Condition
The Digital Audio Broadcast Module (DABM) checks the signal from antenna Band 3.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Voltage too low on the signal cable.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Control module supplied with power.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to ground in the signal cable.

Fault symptom[s]
- DP, Radio/Does not work