Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The mirrors can be adjusted in the X and Y axes via the two motors for each mirror. The door mirror motors are operated via the control panel in the driver's door.
The Passenger door module (PDM) checks the signal from the door mirror on the passenger side of the vehicle.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal through the potentiometer for rear-view mirror control, right/left, is too high.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Operating door mirrors.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the signal cable.
- Open circuit on signal cable.

Fault symptom[s]
- Outer door mirror adjustment not working