Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The Passenger door module (PDM) supplies voltage to the motor right/left in the external rear-view mirror on the vehicle's passenger side.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal too low from the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activation of motor in direction right or left.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to ground in the power supply cable.

Fault symptom[s]
- Outer door mirror adjustment not working