Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TVM-B1A5613

Condition




The Television Module (TVM) checks the antenna's voltage.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Voltage too low
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated control module.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- Open circuit or loose connection in the cable between the antenna and Television Module (TVM).

Fault symptom[s]
- TV/TV reception poor/does not work