Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SRS-B1A5512

Condition
The Supplemental restraint system module (SRS) checks the cable for the collision signal.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal too high.
- Incorrect value runs longer than 2.5 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition position II and III.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to supply voltage in the cable.
- Short-circuit in connections.

Fault symptom[s]
- 7G, Text window and warning symbol/Yellow symbol and text message
- EA, Text window and warning symbol/Red symbol and text message
- KT, Warning lights and chimes/Supplemental Restraint System (SRS) indication/no indication