Fault-Tracing Information

Fault-tracing

Checking calibration
The trouble code indicates that the factory calibration has failed.
The factory calibration has to be done again to enable function of the parking camera.
- Check that the camera is not damaged.
- Check that the camera is installed correctly.
- Perform new factory calibration.





Select continue when the defect has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification
Access to the vehicle is necessary for the following checks.
- Activate parking camera in the menu.
- Activate distance information in the menu.
- Ignition position II or engine running.
- Engage reverse gear.
Check that:
- An image of what is behind the vehicle is shown on the front display screen.
- Help lines change when the steering wheel is turned.
- Help lines are shown for the vehicle's lateral position as well as bars for any objects behind the vehicle.

Is the function OK?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFICATION FAILED - Information

VERIFIED - FAULT FOUND

-------------------------------------------------

Information

Attempt New Test - Checking calibration

-------------------------------------------------