FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Fault-Tracing Information






Fault-tracing

Checking Parking Aid Camera
Troubleshoot connector #C2 on Parking Assistance Camera (PAC) for loose connection or oxidation.
Troubleshoot cable to the rear camera for open circuit or short-circuit.
Troubleshoot connector on the rear camera for loose connection or oxidation.
Check-measure #C2-3 on parking assistance camera (PAC). Value varies normally between 0 - 12 V.
Check-measure the video signal between #C4-2 (-) and #C4-4 (+). Values shall vary between approx. 0-500 mV.
If no faults are found, take action in the following order:
Try with changing rear camera.
If that does not help, replace the parking assistance camera module (PAC).

Other information:
- Signal specification, Parking Assistance Camera (PAC) Signal Specification, Parking Assistance Camera (PAC)
- Parking Aid Camera Removal and Replacement
- Parking Aid Camera Module Parking Aid Camera Module





Continue - Verification

-------------------------------------------------

Verification




Verification
Access to the vehicle is necessary for the following checks.
- Activate parking camera in the menu.
- Activate distance information in the menu.
- Ignition position II or engine running.
- Engage reverse gear.
Check that:
- An image of what is behind the vehicle is shown on the front display screen.
- Help lines change when the steering wheel is turned.
- Help lines are shown for the vehicle's lateral position as well as bars for any objects behind the vehicle.

Is the function OK?

Yes - VERIFIED

No - VERIFICATION FAILED

------------------------

VERIFICATION FAILED - Information

VERIFIED - FAULT FOUND

-------------------------------------------------

Information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking Parking Aid Camera

-------------------------------------------------