Fault-Tracing Information

Fault-tracing

Checking the power supply and ground terminal




The diagnostic trouble code indicates a hardware fault in the battery monitoring sensor (BMS).
Replace the battery monitoring sensor (BMS).

Other information
- Battery Monitoring Sensor, B6304T4, B6324S5, B6324S4 Service and Repair





Choose Continue to proceed to verification.

Continue - Verification

-------------------------------------------------

Verification




- Ignition off
- Reconnect cables and switches
- Ignition on.
Check the communication with the battery monitoring sensor (BMS) by clicking the VCT2000 symbol.





Is communication established?

Yes - FAULT FOUND

No - Diagnostic trouble code (DTC) information

-------------------------------------------------

Diagnostic trouble code (DTC) information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit fault-tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking the power supply and ground terminal

FAULT-TRACING FAILED - No Fault Found

-------------------------------------------------