Fault-Tracing Information

Fault-tracing

Fault-tracing information

Note! If trouble code SRS-U300097 also is stored, then troubleshoot it instead.

The control module has registered a collision signal and stored collision information.
- Before erasing DTCs and resetting the control module, checks must be made of which belt tensioner is activated. See: Checking seatbelt-related components at collision Testing and Inspection
- To erase the trouble code and reset the control module, click on the symbol for VCT2000.





Continue - FAULT FOUND

-------------------------------------------------

Fault-tracing information





Diagnostic trouble code (DTC) information SRS-B119343

Condition
The supplemental restraint system module (SRS) checks the internal collision memory.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Collision signal received and collision information stored.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition position II and III.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None

Possible source
- Collision signal received and collision information stored.

Fault symptom[s]
- EA, Text window and warning symbol/Red symbol and text message
- KT, Warning lights and chimes/Supplemental Restraint System (SRS) indication/no indication

Attempt New Test - Fault-tracing information

-------------------------------------------------