Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition
The control module in the rear door supplies voltage to the lock motor, blocked lock position.
The control module left rear door/right rear door (LDM/RDM) supplies the control module driver's door/passenger door (DDM/PDM) with information about status for lock motor, blocked lock position in the rear door.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Signal too high from the output.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activation of blocked lock position.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.

Substitute value
- None.

Possible source
- The voltage feed cable is short-circuited to voltage.
- Open-circuit in the power supply cable.

Fault symptom[s]
- Does not lock to the deadlock position BLL