Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-B10C91F

Condition

The diagnostic trouble code (DTC) is stored if the control module detects that:
- An electrical fault has occurred in the remote control or in the cables to the antenna.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Engine on and vehicle speed over 19 km/h.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Open-circuit or short-circuit to ground in the signal cable.
- Short-circuit to supply voltage in the signal cable.
- Broken antenna.

Fault symptom[s]
- No keyless functionality