Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information KVM-B102B00

Condition
In order for the Keyless vehicle module (KVM) to function in the vehicle, it must be programmed with codes for remote keys and with codes for the immobilizer.
When the starter button is pressed in, the Keyless vehicle module (KVM) antennae in the passenger compartment and cargo compartment are activated to check whether there is a valid key in the car.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The remote key's ID-number is not valid or the received information is not recognized.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Pressing of start button.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Incorrect response received from the remote key.
- Remote receiver not working.

Fault symptom[s]
- No keyless functionality
- Engine fails to start