Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information CEM-B102408

Condition
Central electronic module (CEM) checks that the remote key is received when programming of new remote key.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The remote key's codes are not received correctly when programming.

Note! The diagnostic trouble code (DTC) can also be stored if something, e.g. a finger is inserted into the starter module.

The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Programming keys

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Temporary interference in surroundings.
- Damaged remote key.

Fault symptom[s]
- Starter motor does not operate
- Message in information display