Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAC-B100E29

Condition
The parking assistance camera (PAC) module communicates with associated camera/cameras. A video signal can be sent from the camera to the front display screen via the Parking Assistance Camera (PAC).
The diagnostic trouble code is stored if the control module detects:
- Incorrect signal between the Parking Assistance Camera (PAC) and front display screen.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Loose connection or oxidation in the connections between Parking Assistance Camera (PAC) and front display screen.
- Open-circuit or short-circuit on the signal cable to the front display screen.
- Look for the cause of the fault in the Infotainment control module (ICM).
- Damaged Parking Assistance Camera (PAC).

Fault symptom[s]
- Park assist camera/Does not work