Collision Avoidance - 'BLIS Service Required' Mssg. In DIM

Technical Journal

TITLE:
"BLIS service required" Message in DIM without DTC

CAR MARKET:
United States

ISSUING DEPARTMENT:
Technical Service

REF NO:
TJ 25252

ISSUE DATE:

YEAR
2012

MONTH
11

DAY
20

PARTNER:
3 US 7510 Volvo Cars North America

FUNC DESC:
Collision avoidance

FUNC GROUP:
3872

"Fixed Right - First Time"





Attachment





Vehicle Type





CSC Customer Symptom Codes

DTC Diagnostic Trouble Codes

Text

Note!
If using a printed copy of this Retailer Technical Journal, first check for the latest online version.

DESCRIPTION:
"BLIS service required" may be displayed in DIM(Drivers Information Module) intermittently during start, without any corresponding DTCs set.
This may occur if the BLIS camera heating element is broken due to a hot spot, or if the lead cable for the heater element has become loose due to a bad soldering.

SERVICE:
Start the engine and make sure that the ambient temperature is below 28C (82F) to activate the heater function.
Test the heater element function by touching the BLIS camera lens with your finger, or spray ice spray to see if the ice disappears.
If there is no heat detected, then remove the mirror from the car and access the heater element for inspection.

If there is a visible hot spot on the heater element, or a loose lead cable, replace the heating element according to the TJ instructions.

VOLVO STANDARD TIMES GUIDE (VSTG) INFO:

Operation number
*99400-2* - **Check/adjust** - "0.1 hrs"
*84627-2* - **BLIS Camera/heating element replacer/remove-install**- "0.1 hrs"

-Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01
-Labor times are valid at the time of release and are subject to change.











To view TJ attachment continue: