Seat Belt Retractor, Rear

This article uses a picture philosophy in the instructions for mechanical work methods. The instructions focus on the pictures and include text only if it is impossible to show the work method in the pictures. For further information, refer to: Description and Operation

Seat Belt Retractor, Rear

Operation number: 88408-2

NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

Removal

NOTE: Removal steps in this procedure may contain installation details.

Disconnect the negative battery lead.

Information about handling and storage of pyrotechnic SRS components.

WARNING:
- Do not use measuring equipment on the supplemental restraint system (SRS) electrical connector.
- Pyrotechnical SRS components must never be taken apart, repaired or transferred to another vehicle.

Remove the side panel.







Remove connector.







Torque: Safety belt retractor rear to body, 40 Nm

Installation

Install in reverse order.

Check belt function.

Perform an inspection.