M66

Radiator

NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Removing the engine cooling fan (FC)

Remove the electric cooling fan.

Installing the bracket for the radiator







Install:
- the bracket
- the 4 x screws, lightly.

Remove the charge air cooler (CAC).

Removing the engine compartment panel







Remove:
- screws
- the engine compartment panel.

Removing the upper radiator mounting







Remove the following on both sides:
- the screw
- the radiator mounting.

Suspending the condenser







Slightly raise the condenser and suspend from a suitable place, so that the condenser is not put under any strain.

Removing the radiator







Remove:
- the screws for the upper radiator mounting, 2 on both sides.
- the bracket under the air conditioning aggregate
- the radiator downwards.

Installation

NOTE: For tightening torques, see Tightening torque

Installing the radiator







Install:
- Radiator
- the bracket
- the 4 x screws, lightly.







- the screws for the upper radiator mounting, 2 on both sides.







- the engine compartment panel
- the screws, M6.

Install the charge air cooler (CAC).

Installing engine coolant fan (FC)







Install a mobile jack under the radiator.







Remove the bracket.
Install the electric cooling fan.