Differential Input Shaft Seal

Operation number: 46514-2

Differential input shaft Seal

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal

Note! Removal steps in this procedure may contain installation details.

Remove the four-wheel drive clutch. Refer to: Clutch four-wheel drive, B6324S5, TF-80SC AWD Active On-Demand Coupling Module.





999 7023 Extractor pinion seal Haldex coupling 999 7023 Extractor Pinion Seal Haldex Coupling.

Warning! Be prepared to collect escaping fluid.

Installation






Caution! Make sure that the surface is clean and free of foreign material.






Use: Rear axle oil, 1161620





999 7339 Drift 999 7339 Drift







Fill and check the oil level in the final drive.