Sealing Ring, Bevel Gear, Right

Sealing ring, bevel gear, right

Special tools:
999 5919 PULLER 999 5919 Puller
999 2943 999 2943
999 7190 Drift 999 7190 Drift
999 1801 STANDARD SHAFT 999 1801 Standard Shaft

Removal

Removing drive shaft right-hand side
Remove the right-hand drive shaft.

Removing the sealing ring




Outer sealing ring. Use: 999 5919 PULLER 999 5919 Puller.




Use: 999 2943 999 2943.

Installation

Installing a new sealing ring




Use 999 7190 Drift 999 7190 Drift , extend if necessary using 999 1801 STANDARD SHAFT 999 1801 Standard Shaft.





Use 999 7190 Drift 999 7190 Drift , extend if necessary using 999 1801 STANDARD SHAFT 999 1801 Standard Shaft.

Finishing

Checking the oil level in the bevel gear
Check the oil level in the bevel gear. Refer to: Transfer case Rear Seal, B6324S5, TF-80SC AWD, B6324S5, TF-80SC .
Install the right driveshaft.