Power Steering Pump: Service and Repair

Operation number: 64518-2

Power steering pump

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal

Note! Removal steps in this procedure may contain installation details.

Remove relay and fuse box engine compartment. Refer to: Integrated relay / fusebox in engine compartment, B6324S5 Integrated Relay/Fusebox In Engine Compartment































Warning! Be prepared to collect escaping fluid.





Torque: M8, 24 Nm






Warning! Be prepared to collect escaping fluid.

Pressure hose in pump (M16) Refer to: Tightening torque [1][2]Specifications.





999 7077 Jimmy bar 999 7077 Jimmy Bar














Torque: M8, 24 Nm





Torque: M6, 10 Nm






Note! Do not loosen the bolt more than 4 turns.

Torque: M6, 10 Nm










Torque: M8, 24 Nm





Torque: M8, 24 Nm















Note! Make sure that a new component is installed.

Installation

To install, reverse the removal procedure.

Perform power steering system bleeding air. Refer to: Power steering system, bleeding Service and Repair