Pulse Wheel, Drive Shaft, Replacing

Pulse wheel drive shaft, replacing

Special tools:
999 5695 Socket 999 5695 Socket

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Preparation
Remove the drive shaft. See

Removing the pulse wheel




Secure the drive shaft in a vise with soft jaws.
Tap off the pulse wheel using a hammer and a cold chisel.

Installing the pulse wheel




Press the pulse wheel into place. Use tool 999 5695 Socket 999 5695 Socket and the screw for the drive shaft.
Install the drive shaft. See