Engine Support Insulator, Rear

Operation number: 21818-2

Engine support insulator, rear

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Removal

Note! Removal steps in this procedure may contain installation details.










Torque: M10, 50 Nm





999 5716 Reading off tool 999 5716 Reading Off Tool










Tighten the heat guard to the engine pad. Refer to: Tightening torque, B6324S5 Tightening Torque





Torque: M10, 50 Nm





Torque: M10, 50 Nm

Installation

To install, reverse the removal procedure