Drive Belt Tensioner: Service and Repair

Operation number: 21582-3

Tensioner accessory drive belt

Note! Some variation in the illustrations may occur, but the essential information is always correct.

Removal

Note! Removal steps in this procedure may contain installation details.

Remove the battery. Refer to: Battery, disconnecting Battery Disconnecting


























M6. Refer to: Tightening torque, B6324S5 Tightening Torque





Use: 19 mm fixed wrench. , slacken the tensioner and relive the tension on the belt.
Use: 3 mm pin. and lock the tensioner in position.
When installing, check the belt's position on all belt grooves.





M8. Refer to: Tightening torque, B6324S5 Tightening Torque
M10. Refer to: Tightening torque, B6324S5 Tightening Torque





M8. Refer to: Tightening torque, B6324S5 Tightening Torque





M8. Refer to: Tightening torque, B6324S5 Tightening Torque

Installation

To install, reverse the removal procedure