Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information BCM-C11164A

Condition





Note! The diagnostic trouble code only applies to vehicles equipped with DSTC.

Diagnostic trouble code BCM-C11164A is generated if the brake control module (BCM) registers that the factory test was not completed.

Substitute value
- TC is blocked.
- SC is blocked.
- AYC is blocked.

Hint: For information on abbreviations: Brake system, abbreviations, B6324S5 Testing and Inspection

Possible source
- AYC regulation during the factory test.
- Factory test not completed.

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- General warning light on.
- Anti-spin is not operational.
- The stability function is not operational.
- The anti-skid function is not operational.