Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information BCM-C111301

Condition




For diagnostic trouble code BCM-C111301, the brake control module can register a malfunction for different reasons. Diagnostic trouble code BCM-C111301 is generated:
- if the inlet or outlet valve circuits in the control module are short-circuited to ground or if there if the circuit is open.
- if the control module is subjected to interference so that its calculation is incorrect
- if the control module registers that there is a malfunction in internal control module circuits for the inlet and outlet valves
- if the inlet valve in the anti-spin circuit of the control module is short-circuited to ground or voltage or if the circuit is open
- if the control module registers an open circuit or short circuit in one of the internal control module circuits.

Substitute value
- ABS is blocked.
- TC is blocked.
- SC is blocked.
- AYC is blocked.
- EBD is blocked.
- BA is blocked.

Hint: For information on abbreviations: Brake system, abbreviations, B6324S5 Testing and Inspection

Possible source
- Internal error in the control module

Fault symptom[s]
- ABS warning light on.
- Brake circuit not working; warning light on.
- ABS is not operational.
- Anti-spin is not operational.
- The stability function is not operational.
- The anti-skid function is not operational.