Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information SAS-C009887

Condition




The control modules transmit and receive information via a standardized communication network, CAN (Control Area Network). If the Steering Angle Sensor (SAS) registers that information from the Central Electronic Module (CEM) about the ignition switch position is missing or faulty for more than 2.5 seconds, the trouble code is set.
The Steering Angle Sensor (SAS) is located in the Steering Wheel Module (SWM) from which it is supplied with power. It is however only the Steering Angle Sensor which communicates on the Control Area Network (CAN).

Substitute value
- The stability function is blocked.

Possible source
- Information from the Central Electronic Module (CEM) is missing or faulty.

Fault symptom[s]
- The anti-spin warning lamp is illuminated.
- General warning lamp lit
- The stability function is not working.