Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code information BCM-C007200

Condition




On vehicles with the STC/DSTC/TRACS anti-spin function, the brake control module (BCM) registers how much the brakes are used and then calculates the temperature of all brake discs. If the calculated temperature exceeds 450 °C (842 °F), diagnostic trouble code BCM-C007200 is generated.
The diagnostic trouble code can be diagnosed when the ignition is on.

Substitute value
- TC is blocked.

Hint: For information on brake system abbreviations: Brake system, abbreviations, B6324S5 Testing and Inspection

Possible source
- Anti-spin control too long.
- Brake actuation too long (the brakes were used so much that brake disc temperature has become too high).

Note! This diagnostic trouble code (DTC) is not due to an internal hardware fault in the Brake control module (BCM) and must not be remedied by replacing the control module.

Fault symptom[s]
- Anti-spin is not operational.

Note! The anti-spin function is blocked until brake disc temperature is below 300 °C (572 °F).