Mirrors, Foldable

Mirrors, foldable























INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.






Mirrors, foldable






Caution! Wait at least three minutes before disassembling the connector or removing other electrical equipment.





- Remove the panel. Disconnect any connectors.





- Remove the two screws.





- Detach the door panel.

Note! The clips consist of two parts.














- Detach the door opener's wire.





- Disconnect the connectors and also any connectors for loudspeakers.
- Place the door panel to one side.





Replacement of the control module only applies to driver's door.





- Unplug the connectors (1).





- Remove the control module. This will not be reused.





- Install in reverse order.





Applies to all models
- Remove the glass from the mirror and disconnect the connectors.

Caution! The glass may break.





- Remove the three screws, disconnect the connector and remove the motor unit.





- Release the three hooks and at the same time remove the cover.










1. Detach the cable tie clips from the door.
2. Unplug the connector.





- Remove the three screws.





- Remove the mirror. This will not be reused.





- Install the mirror in reverse order.
- Reinstall the detached components in reverse order.
- Repeat the operation on the passenger door.





- Download software for the driver's door control module in accordance with the service information in VIDA.