Entertainment Systems: Service and Repair

Infotainment levels upgrade

Equipment










Kit contents













Operation number: 36660

Information

- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

Conditions




Set the ignition key to position 0.
Remove the battery's negative cable.

Removal




Remove the panel.




Disconnect the connector.




Remove the panel.




Remove the screws.




Remove the screws.




Remove the panel.

Vehicles with the 4C system.




Disconnect the connector.

Cars with automatic transmissions








Release the shift-lock function.

All vehicles




Remove the panel.




Detach and fold back the floor covering.
Unhook the cable harness clips.
Disconnect the connector.





Caution! Use suitable tape to protect the components.













Vehicles with the 4C system.





Cars with manual transmissions





All vehicles








Disconnect the connectors.

Vehicles with 5 inch ICM-display












Remove the screws.
Torque: M8, 24 Nm












Disconnect any connector(s).




Remove the screw.
Torque: M8, 24 Nm




Detach and fold back the floor covering.
Remove the screw.
Torque: M8, 24 Nm




Detach and fold back the floor covering.
Remove the screw.
Torque: M8, 24 Nm




Detach the panel.




Remove the screws.









Note! The number of connectors, cables and cable ties can vary depending on the vehicle's equipment level.

Disconnect the connectors.

Installation




Route the cable harness to the existing cable harness.





Note! The number of connectors, cables and cable ties can vary depending on the vehicle's equipment level.

Connect the connectors.








Reinstall the screws.

Removal









Installation





All vehicles

Installation




Connect the connectors.




Reinstall the screws.

Reinstall the removed parts in reverse order.




Download software (application) for the accessory's function. See VIDA or the accessories catalogue for software part number.