Part 3

Hands-free, Bluetooth



























INTRODUCTION
- Read through all of the instructions before starting installation.
- Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
- Ensure that all tools stated in the instructions are available before starting installation.
- Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
- In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.






Hands-free, Bluetooth






































- Tear off the excess foam tape.


























- Fold the carpet to one side.

Applies to left-hand drive cars













1. Connect the cable harness to the control module.
2. Lock the catch.





- Apply foam tape to the front of the control module.











Note! The control module's connection must point forwards with the foam tape towards the sill.

Applies to right-hand drive cars





















1. Connect the cable harness to the control module.
2. Lock the catch.





- Apply foam tape to the front of the control module.











Applies to all models









- Place the connectors and cables as illustrated.
- Reinstall the removed components in reverse order.





- Download software (application) for the accessory's function






Check the function as follows:
- Turn the ignition key to position I.
- Turn on the radio.
- Check that the control panel for Bluetooth lights up.
- Press the button (1) in the middle of the control panel. The radio should mute and a voice should be heard.
- Press the button (2). The voice should now stop and the audio from the radio returns.