Description of Parameters

Description of parameters

Parameters, status

Input signal from contact breakers at the lock buttons
The contact breakers are behind the lock buttons on each external door handle and close when each button is pressed in.
All contact breakers can have the following status.
Open = Contact breaker unaffected.
Closed = Contact breaker affected.

Input signals from unlocking contact breaker in the external door handle, input signals from contact breaker in quick lock and contact breaker in tailgate.
The contact breakers are in the respective fixed part of the external door handle and close when the door handle is started to be pulled out.
The contact breakers for quick locks are in the respective quick lock on the lock unit in the relevant door and are affected by the external door handle via an arm. The contact breaker closes when the external door handle has been pulled out to its limit position.
Contact breaker in the tailgate is inside the opening handle on the lid and closes when the handle is pressed in.
All contact breakers can have the following status.
Open = Contact breaker unaffected.
Closed = Contact breaker affected.

Input signals from contact breaker in the starter module, at clutch pedal and brake pedal
Contact breaker in the starter module indicates that the key has been inserted in the starter module.
Contact breaker at the clutch pedal closes when the clutch pedal is depressed more than 25% of the stroke length.
Contact breaker at brake pedal closes when the brake pedal is depressed.
All contact breakers can have the following status.
Open = Contact breaker unaffected.
Closed = Contact breaker affected.

Parameters, value

Power supply
Indicates the level of power supply to the control module.
The value is given in volts (V).
The normal value is 11.5 -14.5 A.