Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PAM-U300316

Condition
Parking Assistance Module (PAM) checks its own system voltage.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The system voltage is lower than 9.0 V.
- Incorrect value runs longer than 1 second.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Short-circuit to ground in the power supply cable.
- Contact resistance or oxidation in the terminals.
- Damaged generator (GEN).

Fault symptom[s]
- Parking Assistance System, malfunction
- Information lamp is on
- Message in information display