Fault Tracing Information

Fault-tracing information

Fault-tracing information
This diagnostic trouble code (DTC) may for example be stored when:
- Mechanical or hydraulic fault in the power steering system (example: steering gear, hoses or pipes blocked).
If the fault is intermittent it means that it has been registered previously but is no longer present. Intermittent faults can occur due to a number of different reasons. The fault is evaluated depending on how it occurs.
Check the above and remedy if necessary. If the DTC then recurs with permanent status and no fault can be found (as above), replace the Power Steering Control Module (PSCM).





Continue - FAULT FOUND

-------------------------------------------------