Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information TCM-U210100

Condition
The Transmission control module (TCM) receives information about current vehicle configuration from Central electronic module (CEM).
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Vehicle configuration from Central electronic module (CEM) is incorrect.
- The vehicle configuration from Central electronic module (CEM) is not the same as the one stored in the control module.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Ignition switch position II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- The control module from another vehicle has been installed.
- Fault trace the central electronic module (CEM).

Fault symptom[s]
- None.