Fault-Tracing Information

Fault-tracing

Checking communication
Check CAN communication between the central electronic module (CEM) and the Closing velocity module (CVM).
If no malfunction is found:

- Fault-trace the central electronic module (CEM).

Other information
- Connecting the breakout box, Closing velocity module (CVM) Connecting the Breakout Box, Closing Velocity Module (CVM)
- Signal description, Closing velocity module (CVM) Signal Description, Closing Velocity Module (CVM)
- General information about fault-tracing in the CAN network Initial Inspection and Diagnostic Overview
- Checking wiring and terminals Checking Wiring and Terminals

Continue - DONE

-------------------------------------------------