Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information PBM-U200264

Condition
Park Brake Module (PBM) checks information from switch parking brake.

The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal from switch parking brake is defective.
- Incorrect signal lasts longer than 60 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated function.
- Ignition position 0, I and II.

Note! The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.





Substitute value
- None.

Possible source
- Switch parking brake is stuck in activated position.

Fault symptom[s]
- Warning lights and chimes/Parking brake indication/no indication
- Text window and warning symbol/Yellow symbol and text message
- Electrical parking brake; No Functionality
- Electrical parking brake; Reduced Functionality